Our Customers' Cars & Racing Project Builds
As we only sell the finest quality, most hardcore parts on the planet, many of our customers tend to have extremely innovative, extremely well engineered project cars which they fit our parts to.
Below you can find some examples of our customer's cars and project cars using the products we sell, and racecars which we sponsor.
As you can see below, we ship our products all over the world, and our parts end up on some very interesting and innovative vehicles indeed.
The Infinity Signs Evo X is a great example of a dual use car, with it starting out as a drag racing car that is now being developed for Time Attack racing.
This car is sponsored by The Tuners Group and by Works Bell. The car is based in South Australia.
The car will continue to be used at the drag strip as well, with different aero configurations available depending on whether it is running on the circuit or down the quarter mile.
Instead of running a traditional manual transmission, the car runs the Evo X SST Sportronic Shift Transmission.
On the drag strip, the car has run a 10.83 at 127.88mph at Willowbank Raceway, which the owner of the car advises us makes the car the worlds fastest Evo X SST down the quarter mile, as well as the world's first 10 second Evo X SST.Paddle Shifter for Evo X installed in one of our customers' Evo X
Inside the cockpit, the car has one of our detachable Works Bell paddle shifter systems, which was specially developed for the Evo X from our similar custom detachable paddle shifter systems for the R35 GT-R, E46 M3, Porsche Boxster and Cayman.Paddle Shifter and Quick Release bundle for Evo X with optional Flipper release collar installed in one of our customers' Evo X
The detachable paddle shifter systems as run in this car is now available to anyone who wants the same system in their Evo X with SST Sportronic Shift Transmission.
Click here for more info on our detachable paddle shifter setup for the Evo X ...
Paddle Shifters for other cars can be found here ...
Info on Works Bell's product range of steering bosses / hubs, paddle shifters and quick releases is here - The Tuners Group are one of only two exclusive national distributors for Works Bell worldwide outside of Japan ...
When it's in Time Attack mode, the car runs a dual element DJ Engineering rear wing.
The custom designed front end time attack aero for the car was developed with the assistance of and advice from Simon McBeath. Simon is the designer of the DJ Engineering wings and a world renowned aero expert. You may have seen his books and aero articles in Racecar Engineering Magazine.
More info on our Engineering & Development team is here ...
If you would like Simon's assistance on your car's aero, whether you are running in Time Attack or circuit work or on the quarter mile please contact us.
Click here for more info about Simon's experience ...
Info on our range of DJ Engineering Wings as seen on this car is here ...
Videos of the Infinity Signs Evo X in action can be viewed here ...
created on 2013-03-28 by TTG.
Honda Fit / Jazz GE8
Owned by one of our customers in the USA, this Honda Fit / Jazz GE8 is a build where quality has been considered every step of the way, and it shows very clearly in the result.
The car features a host of high quality modifications, including one of our detachable paddle shifter systems for the Honda Fit / Jazz GE8.
You can find info on the paddle shifter system in this car here ...
Click here to view a gallery of photos of this car ...
created on 2013-07-25 by TTG.
created on 2013-03-28 by adamr.
More info on this car can be found here ...
created on 2011-02-14 by adamr.
Described by Andrew Hawkins of Motive DVD as "the most radical time attack car in Australia", this R34 is built specifically to compete against the top time time attack cars in the world.
The Tuners Group is a proud sponsor of the Advan Hi Octane Racing R34 GT-R driven by Mark Berry.
The car then returned to Eastern Creek for the 2011 World Time Attack Challenge with a new aero package including a DJ Engineering rear wing from The Tuners Group, and ran a 1 minute 31.905 second lap ... a full 2.2 seconds faster than the previous year and fast enough to take 6th place.
In an interview with Mark Berry about the lap time improvement, Mark said ...
"The car is 80 kg (176 lbs) heavier than last year, and has less power ...
All the speed in the car this year was from aero."
A Works Bell Paddle Shifter NEO Universal is used to control the custom 4WD torque split system in Mark Berry's Advan R34 GT-R
The cars runs a number products available from The Tuners Group, including the Works Bell Paddle Shifter NEO Universal which is used to control the custom transfer case torque controller system on the car.The dual element rear wing arrangement run on the Mark Berry Yokohama Advan R34 at 2010 World Time Attack Challenge (Photo credit: Kory Leung Photography)
Links to products available from The Tuners Group seen on this car or mentioned in this article:
- Works Bell Short Boss
- Works Bell Paddle Shifter NEO Universal
- ARC Intercooler
- DJ Engineering Rear Wing
Advan / Hi Octane Racing R34 GT-R Specifications
RB30 Bottom End with Custom Crank Girdle
RB26 Head with extensive Head Work
High Lift Cam 280 Degree Duration 11.5mm lift
Hi Octane Racing Dry Sump Setup
Hypertune Inlet Manifold
Twin handmade ball-bearing Garrett turbochargers
Custom Radiator & Cooling Setup
Turbosmart Blow Off Valve and fuel regulator
ARC Intercooler (available from The Tuners Group)
Hollinger 6 Speed Sequential
Carbon Drive Shaft
Custom 4WD Torque Split controller
Works Bell Paddle Shifter NEO Universal (available from The Tuners Group)
All custom handmade fabricated A arms
Modded Stub Axles
Alcon Monobloc V8 Supercar Brakes 365mm Front 345mm Rear
Wheels and Tyres:
ADVAN Racing RS 18 x 10 (+25 offset)
ADVAN A050 R-spec tyres 265/35R18
Fully Seam Welded
Carbon Kagotani Front Bar
Carbon Sunline Front Guards
Carbon Sunline Side Skirts
Carbon Sunline Rear Guards
DJ Engineering Rear Wing (available from The Tuners Group)
There are a number of articles and videos on our website about this car, so click on the link below for more info about this amazing R34 ...
A collection of videos about the car can be viewed here ...
created on 2010-07-29 by adamr.
As part of our 2010 World Time Attack Challenge activities, The Tuners Group is very pleased to announce our sponsorship of the white Nissan R35 GT-R driven by Marek Tomaszewski.
The car is competing in the Clubsprint Class at the 2010 World Time Attack Challenge, as well as in the 2010 NSW Supersprint Series.
- took 3 outright round wins in a row in the second half of the 2010 CAMS Supersprint Championship season
- finished 1st, 1st, 1st and 2nd in the last 4 races of the season
- took the Class 4D win in 4 rounds of the 9 round series, and second place in Class 4D at the other 5 rounds
... so the cars worst finish in Class 4D pointscore all season at all individual rounds was 2nd.
The car also won the Clubsprint Class trophy at the 2011 World Time Attack Challenge.
As it says in our 2011 World Time Attack Challenge wrap up article ...
On Day 2, Marek improved his Day 1 time by a further 0.077 of a second, posting a 1:42.4910.
This gave Marek the Clubsprint Class win by 0.217 of a second, with Miles Tauber's Croydon Racing Developments Nissan R35 GTR in second place with a 1:42.708, and Ovidiu Zaberca's Hi Octane Racing/Advan Mitsubishi Lancer Evo in third place with a 1:43.0140.
To put Marek's winning time into perspective against last year's times from the 2010 WTAC, the Clubsprint Class at WTAC 2010 was won by Nicholas Kalis in his Evo with a 1:44.3780, so Marek's winning time at WTAC 2011 was 1.887 seconds faster than the winning time at WTAC 2010 in Clubsprint Class.
Last year at WTAC 2010, Marek came 6th with a 1:45.6250, so his winning time this year of 1:42.4910 is a massive improvement of 3.134 seconds better than his time last year.
The car features a host of modifications including ...
- Endless brake pads for R35 GT-R (available from The Tuners Group - click here for more info)
- Aftermarket mid-pipe
- AP Racing brake disks for R35 GT-R (available from The Tuners Group - click here for more info)
- JRZ Suspension shock absorbers (available from The Tuners Group)
The car makes 330 kw at the wheels and is sure to be spectacular in the Clubsprint class at World Time Attack Challenge 2010.
created on 2010-07-29 by TTG.
Sometimes we have the privilege of being involved with some very special projects indeed, and this Porsche Boxster is one such project.
The owner of this car is a former basketball player in the USA, who experiences problems with his feet as a result of his basketball. Unfortunately his foot problems mean that it is difficult for him to operate a clutch pedal with his left foot.
The same problem is quite common with former athletes, and also can affect older drivers with knee issues.
So what do you do when you have a foot or knee problem, love mid engine Porsches, and want a track car ?
The solution for this project was a unique combination of German engineering, Japanese engineering, US know-how and Australian know-how ...
Base vehicle, engine and drivetrain
The car is a 2001 Porsche Boxster S.
The projects power goals have been achieved by fitting an engine from a 911 - in this case the 3.6 litre engine from a 2004 Porsche 996.
To address the owner's foot problems, the car was fitted with a transmission that is an unusual choice for a track car, but one that is ideal in this application - a Porsche Tiptronic semi-sequential transmission.
With the help of with the help of the owner's mechanic in the US and a friend out of state, the owner completely upgraded the Bosch Motronic ECU from 7.2 to 7.8 which consisted of adding cam timing sensors and re pinning wires into a new and flashed ECU.
The car is only one of a dozen Porsches to have this electronic upgrade for engine swap purposes and the only one in the world that we know of that is mated to a Tiptronic semi-sequential transmission.
The owner of the car says ...
I am 6'5" and have feet problems from basketball when I was younger so
- I had to have the tip when I bought the car as it was my only car at the time
- I need a smaller steering wheel because I plan on time trailing the car after I show it off so to say...
So I wanted to put a race wheel in it, with some sort of paddle set up... I have the electronic knowledge now to make just about anything work, but I wanted some paddles... I like the Works Bell units because of their ease of use... but I am not the biggest fan of have the paddles stationary.
So the challenge was set to develop a bolt on kit, incorporating a quick release, and with the paddles rotating with the steering wheel, all while maintaining engineering, fit, finish and quality levels befitting such a stunning project car.
Developing the detachable paddle shifter kit for the Boxster
At The Tuners Group, we don't simply sell parts. We also have an engineering division which undertakes product development, aerodynamics consulting, a range of CAD design work, racecar development and special custom development projects.
In the tradition of specialised engineering teams like those used in specialised aerospace and defence projects, our engineering team is a small team of highly specialised senior experts, with many many years experience.
You can read more about our Engineering & Development Team here ...
Works Bell's paddleshifter units are precision engineered in Japan and revered in the Japanese car tuning world.
We had used various parts from Works Bell paddle shifters in custom racing applications, like on the Revo off road racer which won the South African Off Road Championships for special vehicles, a European WRX Rally Car project, the Mark Berry Advan Hi Octane Racing Nissan R34 GT-R Time Attack car (pictured) in which the paddle shifter is used as a custom system to control the 4WD transfer case / torque split system , and a number of other custom installs.
Back in 2009, The Tuners Group spent a lot of research and development time working out what combination of Works Bell components would be required for a detachable paddle shifter system for the Nissan R35 GT-R. This was for a very special R35 GT-R project car being built by one of our Australian customers
As we are one of only 2 exclusive national distributors for Works Bell worldwide, we have access to Works Bell's highly trained factory engineers in Japan, which is vital for the development of custom installations that have "factory fitted" appearance, engineering and quality levels.The detachable paddle shifter and quick release arrangement devised by The Tuners Group for the Nissan R35 GT-R
We came up with a unique combination of parts to make it all work in the R35, and as shown above the end result was a massive success.
The R35 GT-R kit was then made available to R35 GT-R owners as a bolt on kit by The Tuners Group, and were received with acclaim by the R35 GT-R tuning community.
You can read an article with reaction to the announcement of our detachable paddle shifter kits for the R35 GT-R here ...The detachable paddle shifter system installed in the Boxster
So for the Tiptronic Boxster project, we drew on our engineering skills and development experience from the R35 GT-R detachable paddle shifter project, and The Tuners Group devised a similar kit for the Porsche Boxster (shown above).
A standard length Works Bell steering boss was used in this particular Boxster instead of a Works Bell short boss, because the 6'5" tall driver has long legs and sits with the driver's seat a long way back, so he found that the standard length boss placed the steering wheel in an ideal driving position for him. Drivers who prefer the steering wheel further away and sit closer to the steering wheel can of course use a Works Bell short boss instead.
When we told the owner of the Boxster Tiptronic project car that we could supply him with a paddle shifter setup for his Boxster, with all the wiring concealed, and the paddle shifter and steering wheel detachable, and with the paddles rotating with the steering wheel, thereby meeting all the owner's project goals, he replied by email ...
Wow... yet again you blow me away ! You have convinced me this is the way to go!!!
You have also sold me on the quick disconnect and conductor connections... I was just planning on doing a clean coiled cord setup, but this is SO MUCH cleaner, that I think it would actually add to the appeal of the car!
I also think that this setup could really develop a following in the states with the upper level Porsche owners, especially with the growing popularity of the Porsche PDK transmission.
This kit is now available for other Porsche and BMW ownersThe detachable paddle shifter system installed in the Boxster
Just like the detachable paddle shifter kit for the R35 GT-R was then made available from The Tuners Group as a kit for other R35 owners to enjoy and fit to their own cars, the detachable paddle shifter kit for the Boxster is now also available for sale to Boxster owners.
The detachable paddle shifter kit for the Boxster can be purchased with the quick release available in a range of colours, so if you want a stealthy integrated look to your kit, a black version is also available.
Versions for the Boxster with either a standard length boss as used on the project car or with a shorter boss are available, so you choose which option places the steering wheel in your ideal driving position. The exact position of the steering wheel can also be fine tuned down to 10 mm increments with an optional Works Bell Steering Wheel spacer, to achieve the perfect driving position.
A detachable paddle shifter kit for the BMW E46 M3 is also now available from The Tuners Group, with 2 installs underway on the first two E46 M3's to receive the kit.
Of course we can also draw on our experience gained with the R35 GT-R and Boxster kits to devise similar detachable paddle shifter kits for a wide range of cars. Contact us if you are interested in a similar kit for your car.
If you want the paddle shifter without the quick release (a non-detachable paddle shifter) for your BMW or Porsche, non-detachable kits are now available for various models of Porsches including:
- 986 Boxster Tiptronic
- 993 Tiptronic,
- 996 Tiptronic
- BMW E46 3 series with SMG Steptronic transmission
- BMW E90 3 series with SMG Steptronic transmission
... all available from The Tuners Group.
As shown above, the end result is in the 986 Boxster Tiptronic project car is not only completely functional from an engineering perspective, but also looks fantastic.
But most importantly, the project has allowed a driver to continue to enjoy his passion for Porsches and for motorsport, and to not let his foot injuries from his sporting career hold him back on the track.
And that, as they say, is what it's all about.
Links to products available from The Tuners Group seen on this car or mentioned in this article
Click on the links below if you would like more info about a similar setup for your Porsche or BMW ...
Works Bell Rapfix II Steering Wheel Quick Release ...
Works Bell Paddle Shifter NEO for Porsche 986 Boxster Tiptronic (without steering quick release) ...
Works Bell Short Steering Boss Hub For Porsche 993 series and 996 series 911, and 986 Boxster ...
Works Bell Paddle Shifter Kits For Porsche and BMW vehicles ...
Works Bell Paddle Shifters For Japanese Vehicles ...
created on 2010-07-12 by adamr.
The Formula SAE team is part of the School of Aerospace, Mechanical and Mechatronic Engineering at the University of Sydney and is one of Australia's premier Engineering schools.
The University's FSAE page reads ...
"Formula SAE is a student engineering competition where teams design, construct and race a small open-wheeled racing car intended for use in weekend autocross competitions.
All research, design and manufacture must be completed within a period of 12 months to prepare for the annual event held by the Society of Automotive Engineers Australasia.
The three-day event scores teams on their design, costing and marketing skills as well as dynamic events of skid pad, acceleration, autocross and endurance."
The Sydney University 2008 FSAE Racecar at the Sydney International Motor Show
We met the University's Formula SAE Team at last years' Sydney International Motor Show, where they put on a very professional display of their 2008 car (shown above).The Works Bell Paddle Shifter NEO Universal, Works Bell Rapfix Racing Quick Release and Momo Steering Wheel in the University of Sydney's 2009 Formula SAE Racecar
We were very impressed with the knowledge, dedication and enthusiasm of the team, so we organised sponsorship of the team by Works Bell, who provided a Works Bell Paddle Shifter NEO Universal and Works Bell Rapfix Racing Quick Release to the team for their new 2009 racecar.
The Rapfix Racing Quick Release
The Rapfix Racing Quick release is designed for competition cars where the quick release is welded to the steering column shaft.
The Rapfix Racing Quick Release is engineered and precision manufactured in Works Bell's state of the art production facilities in Nagano Japan, by highly skilled fabricators and engineers.Close up of the patented ball locking system in the detachable Works Bell Rapfix Racing Quick Release - click the photo to enlarge
Unlike splined quick releases which use splines that you have to line up, the Works Bell Rapfix Racing quick release uses Works Bell's patented ball locking system as seen on the world reknowned Rapfix II quick release. There are no splines to line up !
So instead of needing to line up splines to re-attach the steering wheel, you just slide the steering wheel onto the steering column with the wheel turned to any angle of rotation and spin the wheel, and the quick release will then lock when the correct angle of rotation is reached.
Additionally, when the steering wheel is removed from the steering column, the Rapfix Racing locks open automatically, so there is no need to pull on the release collar when re-attaching the steering wheel. You just slide it back on, spin it til it locks automatically, and go.
Works Bell have become an SFI Participating Manufacturer in the SFI Spec 42.1 (Steering Wheel Quick Disconnect/Release Program) and the Works Bell Rapfix Racing Quick Release has passed the SFI tests.
SFI safety standards are recognised by the world's leading motorsport series, including NASCAR (US National Association of Stock Car Auto Racing), IRL (Indy Racing League), FIA Drag Racing (Federation Internationale de I'Automobile Drag Racing), NHRA (US National Hot Rod Association), ANDRA (Australian National Drag Racing Association), CAMS (Confederation of Australian Motor Sport), IKF (International Kart Federation), MSNZ (Motorsport New Zealand), NASA (National Auto Sport Association), PCA (Porsche Club of America), SAE CDS (SAE Collegiate Design Series Intl.), SCCA (Sports Car Club of America), WKA (World Karting Association) and many others, so the Works Bell Rapfix Racing Quick Release can be used on everything from drag cars to formula racing cars like Formula Ford, Nascars, and even Indy Racing League cars.
Click here for more info on the Works Bell Rapfix Racing Quick Release ...
The Works Bell Paddle Shifter NEO Universal is a product that has been released by Works Bell specifically to meet the requirements of The Tuners Group's racing customers.
It consists of the heart of the Works Bell Paddle Shifter Kits as seen on vehicles like the R35 GT-R, Porsche 996, BMW E46 & E90, 350Z, RX-8, and other high end semi-sequential Japanese vehicles.
Works Bell in Japan reacted to demand from The Tuners Group's racing customers, and in November 2008 released the Works Bell Paddle Shifter NEO Universal - a universal paddle shifter ideal for custom installs on racing cars and road cars alike.
Click here for more info on the Works Bell Paddle Shifter NEO Universal ...
Building The Formula SAE RacecarRear view of the paddle shifter, quick release and steering wheel, with custom alloy bracket for the paddle shifter made by the students
The 2009 car is powered by an Aprilia motorcyle engine, and one of the students developed a highly innovative sequential shifting system to handle the gearshifts, via the Works Bell Paddle Shifter NEO Universal.
With a power rating of 45kW (60.3 hp) but a weight of just 193 kg, the car has a power to weight ratio of 3.2 kg per hp, and a 0-100 km/h time of just 3.67 seconds.
The shifter system is hydraulic, with hoses supplied by Stauff and pumps supplied by Hypac.
The system is more responsive than the previous pneumatic system implemented, providing a faster, more reliable and easily controllable gear shifting.
Launch from line has been very successful, and easy paddle shifting provides quick up and down shifts with automatic actuation of the clutch.
There is also a neutral button that can engage neutral from any gear. Edward McMillan, Mechatronics engineer, was responsible for the design and implementation of this system.
On the skidpan, it pulled a massive 2G's, which is a testament to the highly skillful design of the cars suspension devised by the students.
Other sponsors of the team include such industry stalwarts as Boeing, Bilstein Suspension, Loctite, and Works Bell of course.
A special thank you to the University of Sydney's:
- FSAE co-ordinator Andrei Lozzi
- Team Leader Jared Holmes
- Team Managers Stephanie Fulton and Robert Muir and
- Eloise Matheson (Junior for Steering and Suspension, who co-ordinated sponsorship arrangements with us during the year)
... for your complete professionalism and hospitality, both during the year and at the official launch of the car.
Links to products available from The Tuners Group seen on this car:
created on 2010-01-08 by adamr.
The latest car to be featured in our customer cars gallery is this Australian Mitsubishi Evo IX.
It's a fine example of a car that has been built with great attention to detail and high quality parts from manufacturers like Works Bell, ARC, Tomei, Trust, and Defi.Works Bell Rapfix GTC Hybrid Tilting Quick Release and Personal Steering Wheel - Available from The Tuners Group
The interior features a Works Bell Tilting Rapfix GTC Hybrid Quick Release, Works Bell Short Boss and Personal Fitti E3 Corsa steering wheel, all available from The Tuners Group. Contact Us if you want the same parts for your car.Works Bell Rapfix GTC Hybrid Tilting Quick Release - Available from The Tuners Group
The Works Bell Tilting Rapfix GTC Hybrid Quick Release allows the steering wheel to tilt up out of the way for simple driver entry and exit and features a glove friendly release handle.
Beautiful interior detailing is also a feature of this car, particularly the alloy work in the rear of the interior and the beautifully designed and built roll cage.
The engine bay is filled with a host of ARC goodness including a range of ARC Titan titanium parts, including the ARC Ti Sparkplug Cover, ARC Ti Polished Heat Shield, ARC Ti Radiator Cover, ARC Air Box, ARC Titan Intercooler Intake Pipe and ARC Titan front strut brace, which are all available from The Tuners Group.ARC Airbox - All the ARC products on this car are available from The Tuners Group
This car is a perfect example of a quality build that is timeless and will still look great many years from now. A huge congratulations to the owner of this car for his planning, attention to detail and commitment to high quality parts.ARC Titan Titanium Shift Knob (available from The Tuners Group)
Links to products available from The Tuners Group seen on this car or mentioned in this article:
- Works Bell Tilting Rapfix GTC Hybrid Quick Release
- Works Bell Short Boss
- Personal Fitti E3 Corsa Steering Wheel
- ARC Titan Satin Finish Titanium Round Shift Knob
- HKS EVC 6
- ARC Ti Sparkplug Cover
- ARC Ti Polished Heat Shield
- ARC Ti Radiator Cover
- ARC Super Induction Box Airbox
- ARC Titan Intercooler Intake Pipe
- ARC Titan front strut brace
Click here to view a photo gallery of more photos of this car ...
What does Shieldcoat do ?
If you noticed the Shieldcoat logos on the car and wondered who they are and what they do ...
Since 1996 Shieldcoat has been manufacturing a range of premium quality, innovative protective coatings for all interior and exterior substrates including, metal, tile and fibro roofs, concrete driveways, garage floors and pathways as well as renders and textures.
Shieldcoat is Australian owned and operated. All products are produced locally using only the finest raw materials sourced from Australia. All it's products are developed to be extremely user friendly and to withstand Australia's harsh climate for many many years. Most products come with a 10 year guarantee.
Shieldcoat has always aimed to be at the leading edge of technology in order to stay ahead of the competition. They specialise in water based acrylic technology and have developed a water based, environmentally friendly alternative to many of the products previously only ever available in a solvent base. Their quality and expertise has also been recognised by some of the largest companies in Australia, meaning they now manufacture products for the likes of PPG, CSR and Boral Roofing.
Some of their most unique products include a heat reflective roof coating called Thermobond HRC that reduces interior temperatures by stopping the transfer of heat through the substrate it is applied to, a range of heat reflective renders and textures called Thermotex and a very hard wearing water based sealer for concrete driveways, garages, factory floors, workshop floors and pathways called Floorshield. For information on these products and many more, visit http://www.shieldcoat.com.au or call them on 07 3274 6911.
created on 2009-12-17 by adamr.
Meet the Pilatus R35.
Sponsored by The Tuners Group, this car is one of the most highly developed R35's in Australia.
This car is one of the first R35's in Australia to receive serious modifications.
While many R35 GT-R owners have been worried about modifying their cars, the owner of this car has jumped right into modifying his R35 with gusto and a no compromise, engineering driven, high quality parts approach.
In terms of body modifications, the car has carbon fibre intakes, bonnet, bootlid, vents and parcel shelf and a pre-preg carbon fibre rear wing.
Suspension is adjustable Penske shocks. Brakes are carbon ceramic brake disks.
Engine wise, as well as the carbon intakes, the car sports dual ARC intercoolers, fed by upgraded turbochargers. The Australian built turbos use IHI cores but with ball bearings to help with faster spool up.
Fuel is delivered by 800cc injectors.
To keep the car cool, the car runs a rear differential cooler, transmission cooler pan, and a front mounted transmission cooler. The car also runs a high volume oil pan, which allows the GT-R to hold 7 litres of engine oil.
To get all the power to the ground, the car runs a very special transmission, hand assembled and blueprinted with a bunch of strengthened internals, and engineered to handle 700 hp continuous.
In the cockpit, the car sports a range of Works Bell goodness and a set of carbon fibre seats for road use, and Velo seats for track use.
The steering wheel is attached to a Paddle Shifter assembly developed and manufactured by Works Bell. This Paddle Shifter turns with the steering wheel.
Click here for more information about the Works Bell Paddle Shifter NEO.
Behind the Paddle Shifter sits a black Works Bell Rapfix II Quick Release.
The entire steering wheel / quick release / paddle shifter assembly is attached to the steering column with a Works Bell Short Steering Wheel Boss Kit Hub For Nissan Skyline GT-R R35.
The car won the 2011 Mt Alma Mile Hillclimb, taking the class win and the outright win against a very competitive field. An article about the car's win at the 2011 Mt Alma Mile Hillclimb can be found here ...
The car still has some very serious modifications yet to come - stay tuned for updates.
Photo Gallery and video
Incar video of the car can be viewed here ...
Links to products available from The Tuners Group seen on this car or mentioned in this article:
- Works Bell Paddle Shifter NEO
- Works Bell Rapfix II Quick Release
- Works Bell Flipper For Rapfix II Quick Release - Yellow Version For JAF & N1 Racing Regulations
- Works Bell Short Steering Wheel Boss Kit Hub For Nissan Skyline GT-R R35
- Sparco Ring Steering Wheel
- ARC Nissan R35 GT-R Intercooler
More articles about this car
The car has been featured on Speedhunters here ...
... and there is a great article about what it is like to drive here ...
created on 2009-09-21 by adamr.
This NSX is a perfect example of an NSX done right.
This car is owned by US based modifier Ginash George. Ginash's previous project car was an incredible 2003 Nissan 350Z project car which was featured in Turbo Magazine, in an article on tunerzine.com and in this article on thespeedlounge.com.
So it's very clear that when it comes to modifying Japanese cars the right way. Ginash definitely knows how to build a car right.
Ginash's new project is this incredible NSX which he is detailing the build of on the Synth19 Blog.
Tying in with the beautiful Imola Orange Pearl paintwork, Ginash has fitted a Works Bell Rapfix II Quick Release and Team Orange Works Bell Steering Wheel, along with a Works Bell short boss for Honda NSX.
The car also has had a number of modifications made to it, including a very rare stainless steel and titanium exhaust system, and an ultra rare Zanardi edition NSX shift knob (from the limited edition of 50 Zanardi NSX's sold in the United States), with a unique mesh shift boot complete with carbon fiber trim from the JDM spec 2002 NA2 NSX-R.
Congratulations to Ginash on an incredible build, and we look forward to seeing what's next for his incredible NSX.
Links to products available from The Tuners Group seen on this car:
- Works Bell Rapfix II Quick Release
- Works Bell Team Orange Steering Wheel
- Works Bell short boss for Honda NSX
created on 2009-05-18 by TTG.