Works Bell Rapfix II Steering Wheel Quick Release ON SALE
We ship products worldwide from warehouses in Australia, the US and Japan. Prices are in Australian Dollars.
Currently on sale at special reduced pricing
Due to a change in the Japanese Yen exchange rate, we are passing on the saving to our customers with special sale pricing on the world renowned Works Bell Rapfix II Quick Release.
The normal full Japanese ex tax retail price on this product is Japanese Yen 29,800 which is Australian $372.22 on 6 October exchange rate.
This special sale pricing is only available for a limited time, so if you want to grab one for your car, click on the Add To Cart button above to place your order while this special sale is on.
We are one of only two factory authorised exclusive national distributors for Works Bell worldwide outside of Japan.
We ship worldwide !
The Works Bell Rapfix II is the original ball lock quick release, invented and patented by Works Bell, and made entirely in Japan.
The Rapfix II is used by the most respected Japanese racing teams and Japanese tuners, including Team Orange, iconic Japanese tuner JUN who use a Rapfix II on their Mitsubishi Evo X project car and the Cyber Evo (winner of the World Time Attack Challenge) also runs a Rapfix II.
The Rapfix II can also be seen on a huge number of D1 and Formula D cars in Japan, as well as hundreds of top level race cars in different categories around the world.
Click here to view info about top Japanese teams and drivers who use Works Bell products ...
The Rapfix II is pre-machined with mounting holes to suit both Momo bolt pattern and Nardi bolt pattern steering wheels.
Optional Glove Friendly Flipper Release CollarClose up photo showing how the Flipper automatically depresses the release button on the Rapfix II when the Flipper is pulled towards the driver
The Rapfix II is available with or without the optional glove friendly Flipper release collar. Info on the Flipper can be found here ...
Read the review of the Rapfix II by Fast Fours Magazine
Highly respected performance magazine Fast Fours Magazine recently published a product review article of our Works Bell Rapfix II Steering Quick Release, where they fitted a Rapfix II, Works Bell Short Boss and Works Bell Original Steering Wheel to an FD3S RX7..
If you've been looking at getting a Rapfix II for your racecar and wondering what is involved in fitting a Rapfix II, the magazine article includes a step by step example DIY guide of how they fitted it to their FD3S ... you can download a PDF of the magazine article below.
Part of the article published by Fast Fours Magazine reads ...
"Really, quick release steering wheels are saturated in win ...
The problem is that out of those who make the purchase, many also make the eternally damming mistake of fitting a cheap, imitation unit ...
On the other side of the playground is the discerning JDM modifier who will no doubt have already heard of the Works Bell Rapfix II unit; race proven, high quality and visually stunning, this is the ultimate steering combination"
Click here download a PDF of the magazine's review of the Rapfix II ...
The Tuners Group sells racing parts for fitment to race cars that are not used on public streets. All parts sold except for street legal/DOT approved parts, are racing parts for off road use only.
New 4 Electrical contact conversion kit now available
The standard version of the Rapfix II has 2 electrical contacts.
A new 4 Electrical contact conversion kit is now available.
The 4 electrical contact conversion kit for the Rapfix II is very useful if you run additional steering wheel mounted buttons on your steering wheel, or if you run a paddle shifter like the Works Bell Paddle Shifter NEO or Works Bell Paddle Shifter NEO Universal, and you want the paddle shifter to be detachable with your steering wheel.
For customers who:
- already own a Rapfix II (2 contact version) who want to contact it to 4 contacts, or for
- customers who wish to purchase a 2 contact version and convert it to 4 contacts ...
Click here for more information about the Works Bell 4 Terminal Insulator Conversion Kit For Rapfix II Quick Release.
Steering Wheel & Hub / Boss Kit Compatibility
There is no welding required to fit a Works Bell Rapfix II Quick Release to your car - it is strictly a bolt on product with no welding required.
At the steering wheel end, the Rapfix II ships pre-machined with bolt holes in both standard 6 bolt Momo bolt pattern steering (PCD 70mm), and 6 bolt Nardi bolt pattern (PCD 74mm).
Of course it is compatible with all Works Bell steering wheels, including the Works Bell Original Steering Wheel, the Works Bell Team Orange Steering Wheel, and the Works Bell Yoshioka Steering Wheel.
The top image above shows a Works Bell Rapfix II (with optional Works Bell Rapfix II Flipper) attached to a Nardi steering wheel and Works Bell Boss Hub (click the photo to enlarge it).
The part of the Rapfix II that attaches to the steering boss / hub has a 6 bolt (PCD 70mm) bolt pattern, the same bolt pattern as used on Momo steering bosses / hubs.
The Rapfix II includes built in hidden terminals for your car's horn, and is built with the precise tolerances and high quality materials that you only find in genuine Works Bell products made in Japan.
It features a plug and socket made from high strength A506 which is then heat treated to H34 standard to increase yield strength then cold forged, SUS304 stainless steel springs, SUJ ball bearings, SUS XM7 stainless steel cap screws.
This forged construction makes it far stronger than merely machined counterfeits and knock offs.
If you would like to read more info on how the Works Bell Rapfix II Quick Release is manufactured, and why the original patented & genuine Works Bell Rapfix II Quick Release is better in every way than the counterfeits and knockoffs ...
Are you running your car in endurance events ?
If you are running your car in endurance events, be sure to check out The Enduro System.
If you are running your car in an endurance event with multiple drivers and driver changes, different drivers want to use their favourite steering wheel for their stints behind the wheel in enduros, and different drivers have different driving positions, due to factors that cannot be changed such as different driver heights and arm reach lengths etc.
In the past, your only option was to come up with a compromise - a compromise on which steering wheel to use, and a compromise on driving position, which increases driver fatigue.
And anyone who has ever competed in an endurance race knows that as soon as you get fatigued, your concentration drops, lap times get slower, you lose ground against your opposition, and safety is compromised.
So we sat down and thought "there simply must be a better way", and set about solving the problem ...
What we have come up with is a package of products that we nicknamed "The Enduro System".
The Enduro System is made up of a number of modular products that you can mix and match to solve once and for all the steering wheel position problems inherent in endurance racing with multiple drivers.
The Rapfix II is available in five color options as shown below:
- Red Body / Silver Sleeve
- Silver Body / Silver Sleeve
- Black Body / Black Sleeve
- Blue Body / Silver Sleeve
- NEW VERSION Orange Body / Silver Sleeve
- Toshiki Yoshioka ToshiKing Black Collaboration Model
Please refer to the diagram above for dimensions of the Rapfix II Quick Release.
Genuine Guarantee & Counterfeits WarningSay no to fakes, counterfeits & knock-offs !
We are one of only two authorised Works Bell distributors worldwide outside of Japan.
By purchasing from us you are absolutely assured of getting the genuine, real deal, made in Japan Works Bell product.
Click here to read our consumer warning about counterfeit, fake and knock off copies of Works Bell products
We Ship WorldwideWe ship worldwide !
The full range of genuine Works Bell products are available directly from us.
We ship Works Bell products worldwide, so we can deliver any of Works Bell's products to your door !
Prices are in Australian Dollars and include GST (Australian Goods & Services Tax). Click here for the Universal Currency Convertor to convert our price into your local currency.
Related Product - The Works Bell Rapfix Key Lock System
Designed to be used with the Works Bell Rapfix II Steering Wheel Quick Release, the Works Bell Rapfix Key Lock System takes the security of your car to a whole new level !
When you park your car, you simply pop your steering wheel off and attach the Key Lock System security cap, which attaches in seconds with a simple turn and click action.
Constructed of ultra tough A5056 billet alloy, it features an ultra scratch resistant almite surface finish, and a high security non-pick cylinder lock mechanism with a ball bearing action and unique keys. The Rapfix Key Lock System is built beyond tough !
With no steering wheel in your car, and no way to remove the Key Lock System, a car thief has no way to drive your car away !
How To Order
Simply select the color you want in the menu at the top of this page, enter the quantity, and click the "add to cart" button.
Category: Steering Wheel Quick Releases
Manufacturer: Works Bell
Model: Works Bell Rapfix II Steering Wheel Quick Release ON SALE